|
|
|
|
 |
How Do I Program the Keyless
Remote for my Blazer? |
 |
The first step in
programming a new keyless remote is being sure that your Blazer is
equipped for it.
-
If your Blazer has a push
button on the tailgate, instead of a place to insert the key, it
probably is equipped for keyless remotes.
-
If your Blazer has the RPO code
AU0, it came equipped for keyless remote from teh factory. (RPO codes
are short for Regular Production Option. When your Blazer was built, the
factory installed a laminated white card in the glove box listing a number
of 3 digit alphanumeric codes which identified the options installed. If
AU0 is on the list, your Blazer had keyless remotes installed.)
-
If you have a working keyless
remote for your Blazer, it obviously is equipped for keyless remote. These
instructions will also work for you but you must also reprogram the
existing remote at the same time you add the new ones.
- With the driver door closed, hold down the power unlock button on
the door panel.
- Turn the ignition switch to the ON position.
- Turn the ignition switch to the OFF position.
- Turn the ignition switch to the ON position.
- Turn the ignition switch to the OFF position.
- Release the power unlock button on the door panel. The remote
control door lock receiver will respond in the following manner in
order to indicate that the receiver is in
the programming mode:
Locking the doors
Unlocking the doors
Important
All extra transmitters must be programmed at this time. When a new
transmitter is programmed, it will deactivate the old transmitters.
- Hold down the lock and unlock buttons on the transmitter until the
remote control door lock receiver will respond in the following manner:
Locking the doors.
Unlocking the doors.
- Repeat step 7 for each additional transmitter.
- Turn the ignition switch to the ON position in order to exit the
transmitter programming mode.
This procedure is specified for the 1999 Blazer and has been tried
successfully on several other year models older and newer. The only way to
be certain if it works for yours is to try it.
 |
|
|
